Waste Rubber Refining Machine With 45% Oil Yield

Waste Rubber Refining Machine With 45% Oil Yield

1. Analysis and test of the raw material

The materials consists of plastic and rubber such as rubber, waste tyres, and waste rubber soles and so on. The oil production of the tyres beyond ø 650 is around 45%;The oil production of the tyres of the bikes, motorcycles and cars is 35%; The oil production of rubber soles is around 27-33%; The oil production of black rubber is about 35%; The oil production of gum outsole is around 45%.

2. Working process of High quality Waste Rubber Refining Machine With 45% Oil Yield:

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460°C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

3. End of Product from Waste Rubber Refining Machine With 45% Oil Yield:

4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the Waste Rubber Refining Machine With 45% Oil Yield.

5. Land requirement: 300sq meters(10m*30m)

6. Exporting Experience: