Low Consumption Waste Tire Recycling Plant

Low Consumption Waste Tire Recycling Plant

The technology characters of pyrolysis equipment:

1.Security

The main equipment is of high safety. The phase of the unliquefizable waste gas produced during the process is alkyl from C1 to C4, which is dangerous when burning directly. In our process, it is transferred first through a water seal device and a safety device- burning air muzzle. Before burning, we should ensure the safety of production.

2.Environmental Protective

Dispose waste gas, liquid, and residua in the process:

a. Waste gas: Transferred through two safety device: water close &burning air nozzle. Fully burnt, not only eliminated pollutant but also minimized the quantity of fuels. For smoke dust discharge, we apply series machines of patent in our company Desulphurization and dust remover which could control the smoke dust discharge amount meet relative standards of GB-2001.

b. Waste liquid: Produced waste acidic water in the process of oil disposing (50kg process from 1 ton of oil easy to process for small quantity). counteract the liquid by alkalescent liquid solution. After three stage of filtration, the litmusless wa ste water was introduced to evaporator(use the heat of the flue of main processor as its heating resource)

c. Waste solid. The solid residua will be left after the catalyst splitting from scrap plastic, approximately composes the waste plastic weight about 5% to 10%. Its main component is the thick black carbon. It can be the raw material of the production industry of black carbon. Also could be mixed with the pulverized coal ash which produces for the raw material thermal power plant, also could be the raw material of manufacture pulverized coal ash brick (one kind of environmental protection building material).

Production Line Introduction:

1. Waste materials can be used in the Low Consumption Waste Tire Recycling Plant:

2. Working process of Low Consumption Waste Tire Recycling Plant:

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460°C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

3. End of Product from Low Consumption Waste Tire Recycling Plant:

4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the Low Consumption Waste Tire Recycling Plant.

5. Land requirement: 300sq meters(10m*30m)

6. Exporting Experience: